Dell 810 Owner's Manual page 37

Owners manual
Hide thumbs Also See for 810:
Table of Contents

Advertisement

Code
Text
E2023 BIOS unable
to mirror
memory. Check
DIMMs.
E2025 QPI
initializati
on error.
Contact
support
E2026 Memory
initializati
on error.
Contact
support
E2110 Multibit
Error on DIMM
##. Reseat
DIMM.
E2111 SBE log
disabled on
DIMM ##.
Reseat DIMM.
Causes
The system BIOS could not
enable memory mirroring
because of a faulty memory
module or an invalid
memory configuration.
QuickPath Interconnect
(QPI) failure.
Invalid memory
configuration.
The memory module in slot
"##" has had a multi-bit
error (MBE).
The system BIOS disabled
memory single-bit error
(SBE) logging and will not
log any more SBEs until the
system is rebooted. "##"
represents the memory
module implicated by the
BIOS.
Corrective Actions
See "Troubleshooting
System Memory" on
page 169.
See "Getting Help" on
page 195.
Ensure that the memory
modules are installed in a
valid configuration. See
"General Memory Module
Installation Guidelines"
on page 100. See "Getting
Help" on page 195.
Reseat the memory
module in its socket.
If the problem persists,
see "Troubleshooting
System Memory" on
page 169.
Reseat the memory
module in its socket.
If the problem persists,
see "Troubleshooting
System Memory" on
page 169.
About Your System
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge r810

Table of Contents