Power Indicator Codes - Dell 810 Owner's Manual

Indicator
Link and activity
indicators are off
Link indicator is green
Link indicator is amber
Activity indicator is
green blinking

Power Indicator Codes

The power supplies have indicators that show whether power is present or
whether a power fault has occurred.
• Not lit — AC power is not connected.
• Green — In standby mode, a green light indicates that a valid AC source is
connected to the power supply and that the power supply is operational.
When the system is on, a green light also indicates that the power supply is
providing DC power to the system.
• Amber — Indicates a problem with the power supply.
• Alternating green and amber — When hot-adding a power supply, this
indicates that the power supply is mismatched with the other power
supply. Replace the power supply that has the flashing indicator with a
power supply that matches the capacity of the other installed power
supply.
Indicator Code
The NIC is not connected to the network.
The NIC is connected to a valid network link at
1000 Mbps.
The NIC is connected to a valid network link at
10/100 Mbps.
Network data is being sent or received.
About Your System
21