Dell 810 Owner's Manual page 54

Message
Time-of-day not
set - please run
SETUP program
Timer chip
counter 2 failed
TPM or TCM
configuration
operation
honored. System
will now reset.
TPM or TCM
configuration
operation is
pending. Press
(I) to Ignore OR
(M) to Modify to
allow this change
and reset the
system.
WARNING:
Modifying could
prevent
security.
TPM or TCM
failure
54
About Your System
Causes
Incorrect Time or Date
settings; faulty system
battery.
Faulty system board.
A Trusted Platform Module
(TPM) or China Trusted
Computing Model
(TCM)configuration
command has been entered.
The system will reboot and
execute the command.
This message appears during
system restart after a TPM or
TCM configuration
command has been entered.
User interaction is required
to proceed.
A TPM or TCM function has
failed.
Corrective Actions
Check the Time and Date
settings. See "Using the
System Setup Program and
UEFI Boot Manager" on
page 59. If the problem
persists, replace the system
battery. See "System Battery"
on page 144.
See "Getting Help" on
page 195.
Information only.
Enter I or M to proceed.
See "Getting Help" on
page 195.