Installing A Cooling Fan; Removing The Cooling Fan Assembly - Dell 810 Owner's Manual

Installing a Cooling Fan

WARNING:
expose you to a risk of electric shock. Exercise utmost care while removing or
installing cooling fans.
1 Align the connector on the fan with the connector on the system board.
2 Lower the fan into the cooling fan assembly until the release tab snaps into
place. See Figure 3-12.
3 Close the system. See "Closing the System" on page 85.

Removing the Cooling Fan Assembly

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from its electrical outlet.
2 Open the system. See "Opening the System" on page 84.
3 Lift the blue release levers in the direction of the arrows to release the
cooling fan assembly from the chassis. See Figure 3-13.
4 Grasp the blue release levers and lift the cooling fan assembly out of the
system. See Figure 3-13.
110
Installing System Components
Opening or removing the system cover when the system is on may
Many repairs may only be done by a certified service technician. You