Chapter 4 Reference Information; Printing Specifications - Epson TM-T88II Series Operator's Manual

Chapter 4
Reference Information

Printing Specifications

Printing method:
Dot density:
Printing direction:
Printing width:
Characters per line
(default):
Character spacing
(default):
Printing speed -
High speed mode:
Printing speed -
Low power
comsumption mode:
Printing speed -
when a ladder bar
code is printed:
Thermal line printing
180 dpi 180 dpi [the number of dots per
25.4 mm (1")]
Unidirectional with friction feed
72 mm (2.83"), 512 dot positions
42 (Font A)
56 (Font B)
0.28 mm (.01") (2 dots) (Font A)
0.28 mm (.01") (2 dots) (Font B)
Programmable by control command.
28.4 lines/second maximum
(1/6" feed, at 24V, 20° C,
density level 2)
Approximately 120 mm/second
maximum (approximately 4.72"/second
maximum)
Speed is adjusted deepening on the
applied voltage to the printer and head
temperature conditions automatically.
Approximately 16.5 lines/second (1/6"
feed)
Approximately 70 mm/second
(approximately 2.76"/second)
Approximately 42 mm/ second
(approximately 1.7''/ second)
Reference Information 4-1