Chapter 4
Reference Information
Printing Specifications
Printing method:
Dot density:
Printing direction:
Printing width:
Characters per line
(default):
Character spacing
(default):
Printing speed - High: Approximately 16.5 lines/second
Printing speed - Low:
Thermal line printing
180 dpi × 180 dpi [the number of dots per
25.4 mm (1")]
Unidirectional with friction feed
72 mm (2.83"), 512 dot positions
42 (Font A)
56 (Font B)
0.28 mm (.01") (2 dots) (Font A)
0.28 mm (.01") (2 dots) (Font B)
Programmable by control command.
(1/6" inch feed, at 24V, 20° C,
density level 2)
Approximately 70 mm/second
(approximately 2.76"/second)
Approximately 11.8 lines/second (1/6"
feed)
Approximately 50 mm/second
(approximately 2.0"/second)
High and low speeds are switched
automatically depending on the voltage
applied to the printer and the temperature
of the environment.
Approximately 28 mm/second
(approximately 1.1"/second) when a
ladder bar code is printed.
Reference Information 4-1