Chapter 4
Reference Information
Printing Specifications
Printing method:
Head wire
configuration:
Head wire diameter:
Printing direction:
Printing speed:
Characters per line:
Characters per inch:
Print modes:
Print modes
Print
Printing
mode
speed*1
Normal
High
Low
Low
speed
Copy
Low
Note:
*1 The printer automatically goes to low speed mode during bit image printing,
regardless of the type of selected paper.
*2 Print mode can be changed using the GS E command.
Serial impact dot matrix
9-pin vertical line, 0.353 mm {1/72"}
wire pitch
0.29 mm {.01"}
Bidirectional, minimum distance
printing
See table on page 4-2.
See table on page 4-2.
See table on page 4-2.
See the print modes table below.
Print head
energizing
Default
time
status
Normal
Depends
on DIP
Normal
SW 2-4
Copy (long)
--
Paper roll
Default
Switching*2
status
Possible
--
Possible
--
Possible
Selected
Reference Information 4-1
Slip paper
Switching*2
Possible
Possible
Possible