Sending The Fax After Removing The Black Shadow (Frame Erase); Frame Erase; Sending A Fax After Setting The Frame Erase - Konica Minolta bizhub C650 User Manual

Useful transmission functions
6.4

Sending the fax after removing the black shadow (Frame Erase)

Frame Erase

When original is scanned while the ADF is open, there may be a black shadow around the original at the time
of scanning the booklet original and the original may be faxed with the black shadow. Frame Erase is a
function that erases the black shadow on Top, Bottom, Right, and Left sides of the original when a booklet
is scanned.
Note
Can be used in both original glass and ADF.
The frame erase quantity can be set within a range of 0.1 - 50 mm (1/16 - 2 inch) with a scale of 0.1 mm
(1/16 inch).
Initial Frame erase value at the time of procurement: 5.0 mm (3/16 inch)
Following functions cannot be used simultaneously.
Quick Memory TX, Total # of Pages, Polling RX, Bulletin board polling RX and Long Original.

Sending a fax after setting the Frame Erase

1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to "Loading the original" on page 2-6.
3
Touch the buttons in order of [Scan Settings], [Erase].
4
Touch [Frame Erase].
C650
Ordinary Frame erasure
transmission transmission
Width of
erasure
6
6-10