Konica Minolta bizhub C550 User Manual page 76

User mode
Item
Index
Destination
Confirm Fax Number
Line Setting
Communication Setting
Limiting Access to Desti-
nations
If "IP Address Fax" was selected
Note
"IP Address Fax" appears if the IP address fax operation is available.
Item
No.
Name
Index
Host Address
Port No.
Destination Machine
Type
C550
Description
Select the index characters for the destination. To normally display
the destination in the touch panel, check the "Main" check box.
Type in the fax number for the destination (up to 38 characters, in-
cluding only numerals, #, *, -, T, P and E).
Enter the fax number again in order to prevent misentering of the fax
number.
This menu item appears when "Confirm Address (Register)" is set
to [ON] from the control panel.
Select the line to be used ("No Selection", "Line 1" or "Line 2"). A
setting can be selected if the optional fax multi line is installed.
Click the [Display] button, and then select the check box for a dis-
played setting ("V34 Off", "ECM Off", "International Communica-
tion" or "Check Destination").
To specify the access level of the destination, click the [Display]
button. If an access permission group is specified for the user who
is logged on, the settings for "Search from Reference Allowed
Group" appear.
If "Search from Reference Allowed Group" is selected, click the
[Search from List] button, and then select an access permission
group from the list. If "Set direct Reference Allowed Level" is select-
ed, select a level.
Description
Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input" is
selected, type in the number. If "0" is specified, the user box is au-
tomatically registered with the next available number.
Type in the name of the destination (up to 24 characters).
Select the index characters for the destination. To normally display
the destination in the touch panel, check the "Main" check box.
Type in the IP address or host name for the destination fax (up to 63
characters). To type in the host name, check the "Please check to
enter host name." check box. If the machine is set to use IPv6, an
IPv6 address can also be specified.
Type in the port number. (Range: 1 to 65535; Default: 25)
Select whether the destination is a color or monochrome machine.
2
2-41