Canon MF6540 - ImageCLASS B/W Laser Software Manual page 48

Introduction
1
Scanning a
Document
2
Troubleshooting
3
Appendix
4
Table of Contents
Index
● Tone Curve Settings
This dialog box enables you to adjust the brightness of a specific
area of an image by selecting the type of the tone curve. The
tone curve is a graph showing the balance of tone input and
output.
Back Previous
[Channel] Select a color to adjust either [Red], [Green],
or [Blue], or select [Master] to adjust all three
colors together when [Color] or [Color
(Documents)] is selected in [Color Mode].
Adjust the elements of grayscale when
[Grayscale] is selected in [Color Mode].
[Select Tone Curve]
Select the tone curve from [No Correction],
[Over Exposure], [Under Exposure], [High
Contrast] or [Invert the Negative/Positive
Image].
[Reset] Resets all the current settings to their default
values.
TOP
Next
2-34