Passive Heatsink Design In A Passive System Environment; Thermal Considerations For Components - Intel D410PT Specification

Intel Desktop Board D410PT Technical Product Specification
Table 25. Thermal Considerations for Components
Component
Intel Atom processor
Processor voltage regulator area
Intel NM10 Express Chipset
Memory DIMM
For information about
Processor datasheets and specification updates
2.6.1 Passive Heatsink Design in a Passive System
Environment
This section highlights important guidelines and related thermal boundary conditions
for passive heatsink design in a passive system environment. Passive heatsink
describes a thermal solution without a fan attached. Passive system environment
describes a chassis with either a power supply fan or a built-in chassis fan.
This information should be used in conjunction with the Thermal/Mechanical
Specifications and Design Guidelines (TMSDG) published for Intel
D500 Series processors. The TMSDG contains detailed package information and
thermal mechanical specifications for the processors. The TMSDG also contains
information on how to enable a completely fanless design provided the right usage
scenario and boundary conditions are observed for optimal thermal design. While the
TMSDG has a section on thermal design for passive system environments
(pages 29-30), the information in this section can also be used to complement the
TMSDG.
2.6.1.1 Definition of Terms
Term Description
T The measured ambient temperature locally surrounding the processor. The ambient
A
temperature should be measured just upstream of a passive heatsink.
T Processor junction temperature.
J
Ψ Junction-to-ambient thermal characterization parameter (psi). A measure of thermal
JA
solution performance using total package power. Defined as (T
Note: Heat source must be specified for Ψ measurements.
TIM Thermal Interface Material: the thermally conductive compound between the heatsink
and the processor die surface. This material fills the air gaps and voids, and enhances the
transfer of the heat from the processor die surface to the heatsink.
TDP Thermal Design Power: a power dissipation target based on worst-case applications.
Thermal solutions should be designed to dissipate the thermal design power.
T external The measured external ambient temperature surrounding the chassis. The external
A
ambient temperature should be measured just upstream of the chassis inlet vent.
54
Maximum Case Temperature
o
99 C
o
85 C
o
113 C
85 o C
Refer to
Section 1.2, page 16
®
Atom™ D400 and
- T )/TDP.
J A