Managing Arrays - Asus P5M2 User Manual

6. Repeat step 5 to add the other disks to the volume.
7. When done, press <C> to create the array, then select Save changes then
exit this menu.
Exit the Configuration Utility and Reboot
8. The utility creates the array.
LSI Logic MPT Setup Utility
Processing... may take up to 1 minute
Creating RAID Arrow ...
5.5.4

Managing Arrays

The LSI Logic MPT Setup Utility allows you to perform other tasks related to
configuring and maintaining IM and IME volumes.
Refer to this section to view volume properties, manage the hot spare disk,
synchronize the array, activate the array, and delete the array.
Viewing volume properties
To view volume properties
1. On the main menu, select RAID Properties.
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter Properties -- SAS1068
Adapter
PCI Slot
PCI Address(Bus/Dev/Func) 05.03.00
MPT Firmware Revision 1.15.00.00-IR
SAS Address 500E0180:60831008
NVIDIA Version 25.02
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item
ASUS P5M2 Series
Create and save new array?
Cancel Exit
Save changes then exit this menu
Discard changes then exit this menu
-/+ = Change Item
v6.05.06.00 (2006.01.16)
SAS1068
00
Disabled
0
(Enabled OS only)
5-1