Table of Contents
Advertisement
5.3.3
Managing Arrays
The LSI Logic MPT Setup Utility allows you to perform other tasks related
to configuring and maintaining IM and IME volumes.
Refer to this section to view volume properties, manage the hot spare disk,
synchronize the array, activate the array, and delete the array.
Viewing volume properties
To view volume properties
1.
On the main menu, select RAID Properties.
LSI Logic MPT Setup Utility
Adapter Properties -- SAS1068
Adapter
PCI Slot
PCI Address(Bus/Dev/Function)
MPT Firmware Revision
SAS Address
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu
Enter = Select Item
2.
On the next screen that appears, select View Existing Array.
LSI Logic MPT Setup Utility
Select New Array Type -- SAS1068
View Existing Array
Create IM Volume
Create IME Volume
Create IS Volume
Esc = Exit Menu
Enter = Select Item
ASUS KFN4-D16 Series
v6.05.06.00 (2006.01.16)
F1/Shift1 = Help
-/+ = Change Item
v6.05.06.00 (2006.01.16)
View the existing configuration.
Create Integrated Mirror Array of 2 disks plus
an optional hot spare. Data on the primary disk
may be migrated.
Create Integrated Mirrored Enhanced Array of 3
to 8 disks including an optional hot spare. ALL
DATA on array disks will be DELETED!
Create Integrated Stripping array of 2 to 8
disks.
ALL DATA on array disks will be DELETED!
F1/Shift1 = Help
-/+ = Change Item
SAS1068
00
07:03:00
0.07.01.00-IR
00000007:00000008
Enabled
0
[Enabled BIOS & OS]
5-19
Advertisement
Table of Contents
