Global_Properties - Asus P5M2 User Manual

4. To remove the boot designator, move the cursor to the disk and press Alt+B.
This controller will no longer have a disk designated as boot.
5. To change the boot disk, move the cursor to the new boot disk and press
Alt+B. The boot designator will move to this disk.
The firmware must be configured correctly in order for the Alt+B feature to
work.
5.5.6

Global_Properties

From the Setup Utility screen, press <Ctrl+C) to enter the LSI Logic Configuration,
then select Global Properties. The Global Properties menu allows you to change
related settings.
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter List
Adapter
SAS1068
Esc = Exit Menu F1/Shift+1 = Help
Allt+N = Global Properties
Pause When Boot Alert Displayed
Sets whether to pause when the boot alert displays. Configuration options: [Yes]
[No]
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter List
Pause When Boot Alert Displayed
Boot Information Display Mode
Support Interrupt
Restore Defaults
Esc = Exit Menu F1/Shift+1 = Help
Allt+N = Adapter List
5-
Global Properties
PCI PCI PCI PCI
BUS Dev Fnc Slot
05 03 00 00 1.15.00.00-IR Disabled 0
-/+ = Alter Boot Order
Global Properties
-/+ = Change Item
FW Revision Status
Ins/Del = Alter Boot List
[No]
[Display adapters & installed devices]
[Hook interrupt, the Default]
Chapter 5: RAID configuration
Boot