Table of Contents
Advertisement
Press <F10> again, the logical drive information appears including a Logical
Drive menu that allows you to change the logical drive parameters.
6.
Select RAID from the Logical Drive menu, then press <Enter>.
7.
Select RAID 10 from the menu, then press <Enter>.
You need at least four identical hard disk drives when creating a RAID 10 set.
8.
Select DWC from the Logical Drive menu, then press <Enter>.
9.
Select On to enable the Disk Write Cache setting, then press <Enter>.
5-12
Chapter 5: RAID configuration
Hide quick links:
Advertisement
Table of Contents
