Asus P5M2 User Manual page 154

Managing hot spares
You may configure one disk as a global hot spare to protect critical data on the
IM/IME volume(s). You may create the hot spare disk at the same time you create
the IM/IME volume. Refer to this section when adding a hot spare on an existing
volume.
If a disk on IM/IME volume fails, the utility automatically rebuilds the failed disk
data on the hot spare. When the failed disk is replaced, the utility assigns the
replacement as the new hot spare.
To create a hot spare
1. Follow steps 1 ~ 3 of section "Viewing Volume Properties".
2. From the View Array screen, select Manage Array, then press <Enter>.
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
View Array -- SAS1068
Array Type
Identifier
Type
Scan Order
Size(MB)
Status
Manage Array
Slot Device Identifier RAID Hot Drive Pred Size
Num
0 SEAGATE ST373454SS 0003 Yes NO Ok No 34331
2 SEAGATE ST373454SS 0003 Yes NO Ok No 34331
3 SEAGATE ST373454SS 0003 Yes NO Ok No 34331
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item Alt+N = Next Array C= Create an array
From the Manage Array screen, select Manage Hot Spare, then press
3.
<Enter>.
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Manage Array -- SAS1068
Identifier
Type
Scan Order
Size (MB)
Status
Manage Hot Spare
Synchronize Array
Activate Array
Delete Array
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item
ASUS P5M2 Series
1 of 1
LSILOGIC Logical Volume 3000
IME
0
51498
Optimal
Disk Spr Status Fail (MB)
LSILOGIC Logical Volume 3000
IME
0
51498
Optimal
5-