ASROCK 775XFire-eSATA2 User Manual page 28

ATX Power Connector
(20-pin ATXPWR1)
(see p.11 No. 33)
ATX 12V Connector
(4-pin ATX12V1)
(see p.11 No. 2)
SLI/XFIRE Power Connector
(4-pin SLI/XFIRE_POWER1)
(see p.11 No. 3)
Game Port Header
(15-pin GAME1)
(see p.11 No. 26)
HDMI_SPDIF Header
(3-pin HDMI_SPDIF1)
(see p.11 No. 29)
HDMI_SPDIF Cable
(Optional)
A. black end
+5V
SPDIFOUT
blue
GND black
Please connect an ATX power
supply to this connector.
Please connect an ATX 12V
power supply to this connector.
It is not necessary to use this
connector, but please connect it
with a hard disk power connecor
when two graphics cards are
SLI/XFIRE_POWER1
plugged to this motherboard at
the same time.
Connect a Game cable to this
+5V
JBB1
header if the Game port bracket
JBX
MIDI_OUT
JBY
is installed.
JBB2
MIDI_IN
1
+5V
JAB2
JAY
GND
GND
JAX
JAB1
+5V
HDMI_SPDIF header, providing
1
SPDIF audio output to HDMI VGA
GND
card, allows the system to
SPDIFOUT
+5V
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI connector of
HDMI VGA card to this header.
Please connect the black end (A)
C
of HDMI_SPDIF cable to the
B
HDMI_SPDIF header on the
A
motherboard. Then connect the
white end (B or C) of
HDMI_SPDIF cable to the HDMI
connector of HDMI VGA card.
B. white end (2-pin) C. white end (3-pin)
SPDIFOUT
blue
GND black
2 8 2 8 2 8
2 8 2 8
SPDIFOUT
blue
GND black