ASROCK 775I65PE-M User Manual
Hide thumbs Also See for 775I65PE-M:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Quick Links

Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any
kind, either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the guide or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ASRock Website: http://www.asrock.com
Copyright©2004 ASRock INC. All rights reserved.
ASRock 775i65PE-M Motherboard
Published November 2004
1 1 1 1 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 775I65PE-M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ASROCK 775I65PE-M

  • Page 1 Disclaimer: Specifications and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide.
  • Page 2: Motherboard Layout

    Clear CMOS Jumper (CLRCMOS0) ATX 12V Connector (ATX12V1) Infrared Module Header (IR1) 775-Pin CPU Socket Floppy Connector (FLOPPY1) 184-pin DDR DIMM Slots (DDR1- 2) Game Port Connector (GAME1) Secondary IDE Connector (IDE2, Black) Internal Audio Connector: AUX1 (White) Primary IDE Connector (IDE1, Blue)
  • Page 3: Asrock I/O Plus

    USB 2.0 Ports (USB01) RJ-45 Port USB 2.0 Ports (USB23) Line In (Light Blue) Serial Port: COM1 Line Out (Lime) PS/2 Keyboard Port (Purple) Microphone (Pink) PS/2 Mouse Port (Green) Shared USB 2.0 Ports (USB45) 3 3 3 3 3 ASRock 775i65PE-M Motherboard...
  • Page 4: Package Contents

    This Quick Installation Guide contains introduction of the motherboard and step-by- step installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice.
  • Page 5: Specifications

    1.2 Specifications 1.2 Specifications 1.2 Specifications 1.2 Specifications 1.2 Specifications Platform: Micro ATX Form Factor: 9.6-in x 8.0-in, 24.4 cm x 20.3 cm CPU: 775-Pin Socket Supporting Intel ® Pentium ® 4 / Celeron ® processor (in 775-land LGA package)
  • Page 6 To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard! It may cause permanent damage! Power Management for USB 2.0 works fine under Microsoft...
  • Page 7: Pre-Installation Precautions

    Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 8 775-LAND CPU For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3. Carefully place the CPU into the socket by using a purely vertical motion.
  • Page 9: Installation Of Cpu Fan And Heatsink

    It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. Step 4. Close the socket: Step 4-1. Rotate the load plate onto the IHS. Step 4-2. While pressing down lightly on load plate, engage the load lever.
  • Page 10 Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Page 11: Expansion Slots (Pci And Agp Slots)

    PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has a special design of clasp that can securely fasten the inserted graphics card.
  • Page 12: Jumpers Setup

    Note: To select +5VSB, it requires 2 Amp and higher standby current provided by power supply. (see p.2 No. 22) (see p.2 No. 22) Note: If the jumpers JL1 and JR1 are short, both the front panel and the rear panel audio connectors can work. Clear CMOS (CLRCMOS0, 2-pin jumper) 2-pin jumper (see p.2 No.
  • Page 13: Onboard Headers And Connectors

    FDD connector (33-pin FLOPPY1) (see p.2 No. 18) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) Secondary IDE connector (Black) (39-pin IDE1, see p.2 No. 6) (39-pin IDE2, see p.2 No.
  • Page 14 USB 2.0 Header ASRock I/O Plus accommo- dates 6 default USB 2.0 ports. If (9-pin USB67) those USB 2.0 ports on the I/O (see p.2 No. 12) panel are not sufficient, this USB 2.0 header is available to...
  • Page 15 CPU Fan Connector Please connect a CPU fan cable to this connector and match (4-pin CPU_FAN1) the black wire to the ground pin. (see p.2 No. 28) ATX Power Connector Please connect an ATX power supply to this connector.
  • Page 16 STEP 3: Connect one end of the SATA data cable to the motherboard’s primary SATA connector (SATA1). STEP 4: Connect the other end of the SATA data cable to the primary SATA hard disk. If you just want to install only one SATA HDD, the installation process is complete at this step.
  • Page 17: Bios Information

    3. BIOS Information 3. BIOS Information The BIOS Setup Utility is stored in the BIOS FWH chip. When you start up the computer, please press <F2> during the Power-On-Self-Test (POST) to enter the BIOS Setup Utility; otherwise, POST continues with its test routines. If you wish to enter the BIOS Setup Utility after POST, please resume the system by pressing <Ctl>...
  • Page 18 ASRock 775i65PE-M Motherboard...
  • Page 19 ® ® Intel ICH5, ASRock 775i65PE-M Motherboard...
  • Page 20 ® ® ASRock 775i65PE-M Motherboard...
  • Page 21 ASRock 775i65PE-M Motherboard...
  • Page 22 ASRock 775i65PE-M Motherboard...
  • Page 23 ASRock 775i65PE-M Motherboard...
  • Page 24 ASRock 775i65PE-M Motherboard...
  • Page 25 ASRock 775i65PE-M Motherboard...
  • Page 26 “ ” SATA2 SATA1 ASRock 775i65PE-M Motherboard...
  • Page 27 AUX1 ASRock 775i65PE-M Motherboard...
  • Page 28 ASRock 775i65PE-M Motherboard...
  • Page 29 ASRock 775i65PE-M Motherboard...
  • Page 30 ® ® “LGA 775 CPU Installation Live Demo” ASRock 775i65PE-M Motherboard...
  • Page 31 Wir danken Ihnen für den Kauf des ASRock 775i65PE-M Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Page 32: Spezifikationen

    1.2 Spezifikationen 1.2 Spezifikationen 1.2 Spezifikationen 1.2 Spezifikationen 1.2 Spezifikationen Plattform: Micro ATX-Formfaktor: 24.4 cm x 20.3cm; 9.6 Zoll x 8.0 Zoll CPU: Unterstützt 775-Pin Socket für Intel Pentium 4 / Celeron Prozessor (in 775-land LGA Paket) Chipsatz: North Bridge: Intel ®...
  • Page 33 Shutdown durch. Bevor Sie das System neu starten, prüfen Sie bitte, ob der CPU-Lüfter am Motherboard richtig funktioniert, und stecken Sie bitte den Stromkabelstecker aus und dann wieder ein. Um die Wärmeableitung zu verbessern, bitte nicht vergessen, etwas Wärmeleitpaste zwischen CPU und Kühlkörper zu sprühen.
  • Page 34: Cpu Installation

    Bevor Sie die 775-Pin CPU in den Sockel sitzen, prüfen Sie bitte, ob die CPU-Oberfläche sauber ist und keine der Kontakte verbogen sind. Setzen Sie die CPU nicht mit Gewalt in den Sockel, dies kann die CPU schwer beschädigen. ASRock 775i65PE-M Motherboard...
  • Page 35 Pin1 Orientierungskerbe Orientierungskerbe 775-Pin Sockel 775-Pin CPU Um die CPU ordnungsgemäß einsetzen zu können, richten Sie die zwei Orientierungskerben der CPU mit den beiden Markierungen des Sockels aus. Schritt 2-3. Drücken Sie die CPU vorsichtig in vertikaler Richtung in den Sockel.
  • Page 36 Hand und ziehen Sie die Kappe vom Sockel während Sie auf die Mitte der Kappe drücken, um ein Entfernen zu erleichtern. Verwenden Sie beim Entfernen die Kappenlasche und vermeiden Sie ein Abreißen der PnP-Kappe. Schritt 4. Sockel schließen: Schritt 4-1. Drehen Sie die Ladeplatte auf den Kühlkörper (IHS).
  • Page 37 Installation des CPU-Lüfters und Kühlkörpers Für Installationshinweise, siehe Betriebsanleitung Ihres CPU-Lüfters und Kühlkörpers. Unten stehend ein Beispiel zur Installation eines Kühlkörpers für den 775-Pin CPU. Schritt 1. Geben Sie Wärmeleitmaterial auf die Mitte (Tragen Sie Wärmeleitmaterial auf. ) des IHS, auf die Sockeloberfläche.
  • Page 38 Öffnen Sie einen DIMM-Slot, indem Sie die seitlichen Clips nach außen drücken. Schritt 2: Richten Sie das DIMM-Modul so über dem Slot aus, dass das Modul mit der Kerbe in den Slot passt. Die DIMM-Module passen nur richtig herum eingelegt in die Steckplätze.
  • Page 39 2.4 Erweiterungssteckplätze (PCI und AGP-Slots): Es stehen 3 PCI- und 1 AGP-Slot auf dem 775i65PE-M Motherboard zur Verfügung. PCI-Slots: PCI-Slots werden zur Installation von Erweiterungskarten mit dem 32bit PCI-Interface genutzt. AGP-Slot: Der AGP-Steckplatz dient zur Installation einer Grafikkarte. Der ASRock AGP-Steckplatz hat speziell entwickelte Klammern, die die eingefügte Grafikkarte sicher festhalten.
  • Page 40: Einstellung Der Jumper

    System-Passwort, Datum, Zeit und die verschiedenen BIOS-Parameter. Um die Systemparameter zu löschen und auf die Werkseinstellung zurückzusetzen, schalten Sie bitte den Computer ab und entfernen das Stromkabel. Benutzen Sie eine Jumperkappe, um die Pins an CLRCMOS0 für 3 Sekunden kurzzuschließen. Bitte vergessen Sie nicht, den Jumper wieder zu entfernen, nachdem das CMOS gelöscht wurde.
  • Page 41 Floppy-Laufwerk (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2 - No. 18) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) Sekundärer IDE-Anschlus (schwarz) (39-pin IDE1, siehe S.2 - No. 6) (39-pin IDE2, siehe S.2 - No.
  • Page 42 (siehe S.2 - No. 17) Interne Audio-Anschlüsse Diese ermöglichen Ihnen Stereo-Signalquellen, wie z. B. (4-Pin CD1, 4-Pin AUX1) CD-ROM, DVD-ROM, TV-Tuner (CD1: siehe S.2 - No. 21) oder MPEG-Karten mit Ihrem (AUX1: siehe S.2 - No. 20) AUX1 System zu verbinden. ASRock 775i65PE-M Motherboard...
  • Page 43 Anschluss für Audio auf Dieses Interface zu einem der Gehäusevorderseite Audio-Panel auf der Vorderseite Ihres Gehäuses, ermöglicht (9-Pin AUDIO1) Ihnen eine bequeme (siehe S.2 - No. 23) Anschlussmöglichkeit und Kontrolle über Audio-Geräte. System Panel-Header Dieser Header unterstützt mehrere Funktion der (9-pin PANEL1) Systemvorderseite.
  • Page 44 2.7 Serial A Serial A Serial A Serial A Serial AT T T T T A A A A A - (SA - (SA - (SA - (SAT T T T T A) F - (SA A) F...
  • Page 45 BIOS-Setup-Programm aufzurufen; andernfalls setzt POST die Testroutinen fort. Wenn Sie das BIOS-Setup-Programm nach dem POST aufrufen möchten, starten Sie das System erneut durch Drücken von <Strg> + <Alt> + <Entf> oder durch Drücken der Reset-Tasten am Systemgehäuse. Details über das BIOS-Setup-Programm entnehmen Sie bitte der Bedienungsanleitung (PDF-Datei) auf der Support-CD.
  • Page 46 Site web ASRock, http://www.asrock.com 1.1 Contenu du paquet Carte mère ASRock 775i65PE-M (Facteur de forme Micro ATX : 9.6 pouces x 8.0 pouces, 24.4 cm x 20.3 cm) Guide d’installation rapide ASRock 775i65PE-M CD de soutien ASRock 775i65PE-M (avec Démo vidéo d’installation de processeur LGA 775) Un câble ruban IDE Ultra ATA 66/100 80 conducteurs...
  • Page 47: Spécifications

    Vitesse: 802.3u (Ethernet 10/100), support du Wake-On-LAN Surveillance Système: Mesure de la température CPU, Mesure de la température du châssis, Coupure auto du CPU en cas de surchauffe pour protéger le CPU (ASRock U-COP)(voir ATTENTION 4), Tachymètre de ventilateur CPU, Tachymètre de ventilateur de châssis, Surveillance du voltage: +12V, +5V, +3.3V, Vcore...
  • Page 48 Pour améliorer la dissipation de la chaleur, n’oubliez pas de mettre de la pâte thermique entre le CPU le dissipateur lors de l’installation du PC.
  • Page 49 A chaque désinstallation de composant, placez-le sur un support antistatique ou dans son sachet d’origine. Lorsque vous placez les vis dans les orifices pour vis pour fixer la carte mère sur le châssis, ne serrez pas trop les vis ! Vous risquez sinon d’endommager la carte mère.
  • Page 50 Socket 775 broches Processeur 775 broches Pour une insertion correcte, veuillez vérifier que vous faites bien correspondre les deux encoches d’orientation sur le processeur avec les deux détrompeurs du socket Etape 2-3. Mettez soigneusement en place le processeur dans le socle en un mouvement strictement vertical.
  • Page 51 PnP pour vous aider. Il est recommandé d’utiliser la languette du capuchon ; évitez de faire sortir le capuchon PnP. Etape 4. Refermez le socle : Etape 4-1.
  • Page 52 Répétez l’opération avec les autres attaches. Si vous enfoncez les attaches sans les faire tourner dans le sens des aiguilles d’une montre, le dissipateur thermique ne sera pas fixé sur la carte mère.
  • Page 53 2.3 Installation des modules mémoire (DIMM) 2.3 Installation des modules mémoire (DIMM) 2.3 Installation des modules mémoire (DIMM) La carte mère 775i65PE-M offre 2 connecteurs DIMM DDR (Double Data Rate) 184 broches. Ayez bien le soin de débrancher l’alimentation avant d’ajouter ou de retirer des modules DIMM ou les composants du système.
  • Page 54: Installation D'une Carte D'extension

    2.4 Slot d’extension (Slots PCI et Slot AGP) 2.4 Slot d’extension (Slots PCI et Slot AGP) Il y a 3 slots PCI et 1 slot AGP sur les cartes mères 775i65PE-M. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Page 55 Note: Pour sélectionner +5VSB, il faut obligatoirement 2 Amp et un courant standby supérieur fourni par l’alimentation. (voir p.2 No. 22) (voir p.2 No. 22) Note: Si les cavaliers JL1 et JR1 sont reliés, les connecteurs audio du panneau avant et du panneau arrière peuvent fonctionner. Effacer la CMOS (CLRCMOS0, le cavalier à...
  • Page 56 (FLOPPY1 br. 33) (voir p.2 No. 18) le côté avec fil rouge côté Broche1 Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (bleu) Connecteur IDE secondaire (noir) (IDE1 br.
  • Page 57 USB 2.0 supplémentaires. En-tête USB 2.0 partagé Cet en-tête USB45 est partagé avec les ports USB 2.0 4 et 5 (9-pin USB4_5) sur ASRock I/O Plus™. (voir p.2 No. 27) Lorsque vous utilisez les ports USB du panneau frontal en connectant le câble USB du...
  • Page 58 Connecteurs audio internes Ils vous permettent de gérer des entrées audio à partir de sources (CD1 br. 4, AUX1 br. 4) stéréo comme un CD-ROM, (CD1: voir p.2 No. 21) DVD-ROM, un tuner TV ou une (AUX1: voir p.2 No. 20) AUX1 carte MPEG.
  • Page 59 SATA sur cette carte mère pour les périphériques de stockage internes. Cette section vous guidera pour l’installation des disques durs SATA. ETAPE 1 : Installez les disques durs SATA dans les baies pour disques de votre châssis. ETAPE 2 : Connectez le câble d’alimentation SATA au disque dur SATA.
  • Page 60 Cette carte mère supporte divers systèmes d’exploitation Microsoft Windows: 98 SE / ME / 2000 / XP. Le CD technique livré avec cette carte mère contient les pilotes et les utilitaires nécessaires pour améliorer les fonctions de la carte mère.
  • Page 61: Contenuto Della Confezione

    Grazie per aver scelto una scheda madre ASRock 775i65PE-M, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Page 62 1.2 Specifiche 1.2 Specifiche 1.2 Specifiche 1.2 Specifiche Piattaforma: Micro ATX Form Factor: 9.6-in x 8.0-in, 24.4 cm x 20.3 cm Processore: Socket 775-Pin in grado di supportare processori Intel Pentium 4 / Celeron (nella confezione 775-land LGA) Chipset: North Bridge: ®...
  • Page 63 Per il settaggio della “Tecnologia Hyper-Threading”, per favore controllare pagina 24 del Manuale dell’utente all’interno del CD di supporto. Controllare la tavola che segue per le frequenze di supporto di memoria e le loro corrispondenti frequenze CPU FSB. Frequenza CPU FSB...
  • Page 64: Installazione

    Tenere i componenti per i bordi e non toccare i ICs. Ogni volta che si disinstalla un componente, appoggiarlo su un tappetino antistatico messo a terra o depositarlo nella borsa data in dotazione con il componente. Nell’usare i giraviti per fissare la scheda madre al telaio non serrare eccessivamente le viti! Altrimenti si rischia di danneggiare la scheda madre.
  • Page 65 Socket da 775-Pin CPU da 775-Pin Per il corretto inserimento, verificare di far combaciare i due denti di allineamento della CPU con le due tacche nel socket. Fase 2-3. Collocare con delicatezza la CPU sulla presa con un movimento puramente verticale.
  • Page 66 Si raccomanda di utilizzare la linguetta del cappuccio per la manipolazione ed evitare di far saltare via il cappuccio PnP. Fase 4. Chiudere la presa: Fase 4-1.
  • Page 67 Ripetere la stessa operazione con gli altri fastener. Se si premono i fastener verso il basso, senza ruotarli in senso orario, il dissipatore non viene fissato bene alla scheda madre Fase 5. Collegare il cavo di alimentazione della ventola al connettore ventola della CPU sulla scheda madre.
  • Page 68 2.3 Installazione dei moduli di memoria (DIMM) 2.3 Installazione dei moduli di memoria (DIMM) La scheda madre 775i65PE-M è dotata di 2 slot DIMM DDR (Double Data Rate) a 184 pin. Scollegare l’alimentazione elettrica prima di aggiungere o rimuovere i DIMM o altri componenti del sistema.
  • Page 69 2.4 Slot di espansione (PCI e slot AGP) 2.4 Slot di espansione (PCI e slot AGP) Esistono 3 slot PCI e 1 slot AGP su entrambe le schede madri 775i65PE-M. Slot PCI: Sono utilizzati per installare schede di espansione con Interfaccia PCI a 32-bit.
  • Page 70 Nota: CLRCMOS0 consente di pulire i dati nella CMOS. I dati nella CMOS includono informazioni del setup del sistema, come per esempio la password di sistema, la data, l’ora, e i parametri del setup di sistema. Per pulire I parametri di sistema e resettare ai parametri di default, spegnere il computer e scollegare l’alimentatore, poi collegare il jumper sul CLRCMOS0 per 3 secondi.
  • Page 71 Floppy disk (33-pin FLOPPY1) (vedi p.2 Nr. 18) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) Connettore IDE secondario (nero) (39-pin IDE1, vedi p.2 Nr.
  • Page 72 Collettore USB 2.0 condiviso Questo collettore USB45 è condiviso con le porte USB 2.0 (9-pin USB4_5) 4 e 5 su ASRock I/O Plus™. (vedi p.2 Nr. 27) Quando si utilizzano le porte USB del pannello frontale, attaccando il cavo USB...
  • Page 73 Connettore audio sul È un’interfaccia per il cavo del pannello frontale pannello audio. Che consente connessione facile e controllo (9-pin AUDIO1) dei dispositivi audio. (vedi p.2 Nr. 23) Collettore pannello di sistema Questo collettore accomoda diverse funzioni di sistema (9-pin PANEL1) pannello frontale.
  • Page 74 Questa sezione illustra come installare hard disk SATA. 1° PASSO: Installare gli Hard Disk SATA negli spazi per le unità disco del telaio. 2° PASSO: Collegare il cavo d’alimentazione SATA al disco rigido SATA.
  • Page 75 CD Questa scheda madre supporta vari sistemi operativi Microsoft Windows: 98 SE / ME / 2000 / XP. Il CD di supporto a corredo della scheda madre contiene i driver e utilità necessari a potenziare le caratteristiche della scheda.
  • Page 76: Contenido De La Caja

    ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 77 1.2 Especificación 1.2 Especificación 1.2 Especificación 1.2 Especificación Plataforma: Factor forma Micro ATX: 24,4 cm x 20,3 cm, 9,6” x 8,0” Processore: Socket 775-Pin in grado di supportare processori Intel Pentium 4 / Celeron (nella confezione 775-land LGA) Chipset: North Bridge: Intel ®...
  • Page 78 Para mejorar la disipación de calor, acuérdese de aplicar thermal grease entre el procesador y el disipador de calor cuando usted instala el sistema de PC. NO utilice una tarjeta AGP de 3,3V AGP en la ranura AGP de esta placa base. Podría causar daños permanentes. ®...
  • Page 79: Instalación

    4. Ponga cualquier componente deslocalizado sobre la bolsa anti- estástica que viene con la placa madre. 5. Al colocar los tornillos en sus agujeros para fijar la placa madre en el chasis, no los apriete demasiado. Eso podría dañar la placa madre.
  • Page 80 Socket de 775 agujas CPU de 775 agujas Para insertarla correctamente, asegúrese de que las dos muescas de orientación de la CPU coinciden con las teclas de alineación del socket. Step 2-3. Coloque con cuidado la CPU en el socket con un movimiento totalmente vertical.
  • Page 81 Para una correcta instalación, consulte los manuales de instrucciones del ventilador y el disipador de la CPU. A continuación se ofrece un ejemplo para ilustrar la instalación del disipador para la CPU de 775 agujas. Paso 1. Aplique el material termal de interfaz en el (Aplique el material termal de interfaz) centro del IHS de la superficie del socket.
  • Page 82 Repita el proceso con los cierres restantes. Si presiona los cierres sin girarlos en el sentido de las agujas del reloj, el disipador no se podrá fijar a la placa madre. Paso 5. Conecte el cabezal del ventilador con el conector del ventilador de la CPU en la placa madre.
  • Page 83: Instalación De Memoria

    Instalación de una DIMM Instalación de una DIMM Paso 1. Empuje los clips blancos de retención por el extremo de cada lado de la ranura de memoria. Paso 2. Encaje la muesca del DIMM hacia la cumbrera de la ranura.
  • Page 84 Paso 2. Quite la tapa que corresponde a la slot que desea utilizar. Paso 3. Encaje el conector de la tarjeta a la slot. Empuje firmemente la tarjeta en la slot. Paso 4. Asegure la tarjeta con tornillos.
  • Page 85 (vea p.2, N. 22) (vea p.2, N. 22) Atención: Si los puentes JL1 y JR1 son cortos, tanto el conector de audio del panel frontal como del panel posterior pueden funcionar. Limpiar CMOS (CLRCMOS0, jumper de 2 pins) jumper de 2 pins (vea p.2, N.
  • Page 86 (vea p.2, N. 18) la banda roja debe quedar en el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (azul) IDE conector secundario (negro) (39-pin IDE1, vea p.2, N.
  • Page 87 USB 2.0 (USB67) está disponible para admitir 2 puertos USB 2.0 adicionales. Cabezar USB 2.0 compartido Este cabezar USB45 comparte los puertos USB 2.0 4 y 5 en (9-pin USB4_5) ASRock I/O Plus . Al usar los (vea p.2, N. 27)
  • Page 88 (vea p.2, N. 13) Conector del ventilador Conecte el cable del ventilador de la CPU de la CPU a este conector y haga coincidir el cable negro (4-pin CPU_FAN1) con el conector de tierra. (vea p.2, N. 28) Cabezal de alimentación ATX...
  • Page 89 PASO 3: Conecte un extremo del cable de datos SATA al conector SATA primario de la placa base (SATA1). PASO 4: Conecte el otro extremo del cable de datos SATA al disco duro SATA primario. Si sólo quiere instalar un HDD SATA, el proceso de instalación se ha completado en este paso.
  • Page 90 2000 / XP El CD de instalación que acompaña la placa-base trae todos los drivers y programas utilitarios para instalar y configurar la placa-base. Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú...

Table of Contents