Installing The Remote Control Batteries; Battery Precautions - Emerson RS1008 Owner's Manual

Home audio system with cd player, digital tuner, 3-way tower speakers and powered subwoofer

Table of Contents

INSTALLING THE REMOTE CONTROL BATTERIES

Locate the Remote Control unit. The battery compartment is on the back side of the remote. Press down on

the battery door locking tab to open and remove the door.

Insert two fresh "AA" alkaline batteries in the battery compartment, then replace the battery door. Be sure to

insert the batteries according to the polarity (+ / – ) markings inside the battery compartment. If the batteries

are inserted incorrectly the remote control will not work.

Follow these precautions when using batteries in this device:

1.) Use only the size and type of batteries specified.

2.) Be sure to follow the correct polarity when installing the batteries as indicated in the battery

compartment. Reversed batteries may cause damage to the device.

3.) Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old

batteries with fresh ones.

4.) If the device is not to be used for a long period of time, remove the batteries to prevent

damage or injury from possible battery leakage.

5.) Do not try to recharge batteries not intended to be recharged; they can overheat and

rupture. (Follow battery manufacturer' s directions.)

RS1008_ib042303.p65

23/4/2003, 14:51

Table of Contents