Reset Button - Emerson RS1008 Owner's Manual

RESET BUTTON

This unit includes a special protective device to prevent permanent damage to the internal computer in the
event of a sudden power surge. If the system does not respond to any commands from the remote control,
or the controls on the main unit, you may have experienced a power surge that triggered the internal
computer to shut down automatically. If this occurs, use a toothpick, straightened paper clip, or similar
object to depress and hold the RESET button (inside pin hole located on right side of display panel) for few
seconds. The unit Power turns ' Off' automatically.
RESET PINHOLE
Note: Although pressing the RESET button will unlock the internal computer after a power surge, it will also
erase all of the preset tuner memories, clock, and timer settings. After turning ' On' the unit again, you will
need to reset the clock and re-program the preset station memories.
27
RS1008_ib042303.p65 27 23/4/2003, 14:51