Table of Contents
Advertisement
12 electrolux
Place the cartridge into the filter tank and
push downwards until it 'clicks' firmly into
place.
The cartridge should stay in place if the fun-
nel is turned upside down.
Step 3: Rinse the cartridge
2x
Take the funnel out of the BRITA water filter
unit, fill it under the tap with cold tap water
and allow it to filter through.
Discard the first two fillings into the sink.
These first two fillings are used to flush the
filter cartridge.
Then, place the funnel back into BRITA wa-
ter filter unit.
Place the cover back onto the jug and
press it carefully downwards to ensure it fits
correctly into place.
Step 4: Refill the water tank
To fill the tank with cold water, simply open
the flip top lid, take a jug of tap water and
pour it inside the tank through the cover as
shown into the picture (use the lid every
time that you want to fill your water).
Important! In order to avoid risk of spillage
of water during closing and opening of the
refrigerator door, we recommend to not fill
completely the water tank but leave a head
space of air.
If you have not used all filtered water in the
water tank within 1-2 days, please discard
any water left inside the BRITA water filter
unit before refilling it.
Allow the water to filter through and repeat
"Step 4" as many times as you want until
the BRITA water filter unit is filled up.
Remove cartridge with ring pull handle
3x=ok
To exchange the cartridge after four weeks,
simply use the ring pull handle on the top of
the cartridge to remove it from the funnel,
and repeat steps 1 - 3 above.
Advertisement
Table of Contents
