Table of Contents
Advertisement
3. Remove the lid and the funnel.
4. Unscrew the valve in counter clockwise
(pay particular attention not to lose the
Valve Gasket because is necessary to a
correct functioning of the features ).
5. Clean the tank lid, the valve and the
gasket with a solution of warm water
and neutral soap. Rinse it and put it in-
side the door hole during the cleaning
of the other components (in order to
avoid cold air leakage from the fridge).
6. Clean the tank and the funnel into the
dishwasher or with a solution of warm
water and neutral soap and rinse them.
7. After the tank components cleaning
take back the valve from the fridge
door and assembly the tank in the in-
verse order (4;3;2;1) of disassembly
(pay attention at the valve gasket posi-
tioning ).
8. Put the assembled tank on the door
along the valve direction.
9. Block the stopping elements in the in-
verse order of unblock.
10. Insert again the BRITA MAXTRA car-
tridge in the funnel .
How to use the BRITA MAXTRA filter
cartridge
A
Step 1: Preparing the cartridge
To prepare your BRITA filter cartridge,
please remove the protective wrapper
(note: cartridge and inside wrapper may ap-
pear moist, this is simply condensation).
Immerse the cartridge in cold water and
shake it gently to remove any air bubbles.
The filter now is ready to use.
As required for some other water filter car-
tridges, there is no need to pre-soak the
new Maxtra Cartridge.
Step 2: Insert in the water tank
Remove the tank lid. Before inserting the
cartridge, remove the funnel and clean it
thoroughly by rising it and wiping it dry.
Then, thoroughly clean the inside of the wa-
ter tank with a dump cloth and wipe it dry
as well.
electrolux 11
Advertisement
Table of Contents
