Crossover Adjustment (X-Over) - Eclipse CD7200 MKII Owner's Manual

ATTENTION
• Refer to the following for the method of
calculating the delay time.
A = (B-C) / 34
A:Delay time (ms)
B:Distance from the listening position to the
furthest speaker (cm)
C:Distance from the listening position to the
speaker to be adjusted (cm)
C
(Example) Listening position:
Driver's seat (left)
B:200 (cm)
C:50 (cm)
Delay time= 200 (cm) - 50 (cm) / 34
= Approx. 4.4 (ms)
Press the [SELECT] (Up/Down)
5
button to adjust the level.
Up :
Increases the dB.
Down :
Decreases the dB.

Crossover adjustment (X-Over)

Specified frequency bands are allocated to each
speaker for improved sound integration.
Press the [SELECT] (Up/Down)
1
button to select the X-Over.
2
Press the [ENTER] button.
The crossover
activated.
B
setting mode is
How to operate the Sound Adjustment Mode
Press the [ENTER] button to set
3
the crossover adjustment channel.
Each time the button is pressed, the
channel changes in the following
order.
4-speaker layout:
Front → Rear → Woofer → Front →
3-way speaker layout:
HPF → Mid-LPF → Mid-HPF → LPF →
HPF →
Press the [SELECT] (Right/Left)
4
button to select the cut-off
frequency.
Each time the button is pressed, the
frequency changes in the following
order.
4-speaker layout:
Front/Rear:
63 Hz ↔ 80 Hz ↔ 100 Hz ↔ 125 Hz ↔
160 Hz ↔ 200 Hz ↔ 250 Hz ↔ 315 Hz
↔ 400 Hz ↔ 500 Hz ↔ 630 Hz ↔
800 Hz ↔ 1kHz ↔ 1.25kHz ↔ 1.6 kHz
↔ 2 kHz ↔ 2.5 kHz ↔ 3.15 kHz ↔
4kHz ↔ 5kHz ↔ 6.3 kHz ↔ 8kHz ↔
10 kHz
Woofer:
20 Hz ↔ 25 Hz ↔ 31.5 Hz ↔ 40 Hz ↔
50 Hz ↔ 63 Hz ↔ 80 Hz ↔ 100 Hz ↔
125 Hz ↔ 160Hz ↔ 200 Hz
3-way speaker layout:
M-LPF/Hi:
200 Hz ↔ 250 Hz ↔ 315 Hz ↔ 400 Hz
↔ 500 Hz ↔ 630 Hz ↔ 800 Hz ↔ 1kHz
↔ 1.25kHz ↔ 1.6 kHz ↔ 2 kHz ↔ 2.5
kHz ↔ 3.15 kHz ↔ 4kHz ↔ 5kHz ↔ 6.3
kHz ↔ 8kHz ↔ 10 kHz
M-HPF/Low:
20 Hz ↔ 25 Hz ↔ 31.5 Hz ↔ 40 Hz ↔
50 Hz ↔ 63 Hz ↔ 80 Hz ↔ 100 Hz ↔
125 Hz ↔ 160Hz ↔ 200 Hz
XII
75