Eclipse CD7200 MKII Owner's Manual page 111

Information
INFO 7 INTERNAL POWER SUPPLY
FAILURE IS OCCURRING
LOAD
NO VALID FILE IN CD-R OR
FILE ERR
USB MEMORY
NO SUPPORT USB MEMORY IS NOT
DEVICE SUPPORTED FORMAT
PROBLEM WITH DATA
USB ERR
TRANSMISSION
XM ANTENNA IS
ANTENNA
DISCONNECTED
XM Satellite RADIO SIGNAL
NO SIGNAL
RECEPTION FAILURE
NO BROADCASTING ON
OFF AIR
SELECTED CHANNEL
UNRECEIVABLE CHANNEL OR
CHANNEL--- NO AVAILABLE CHANNEL IN
SELECTED CATEGORY
INVALID NO RECEIVABLE CHANNEL
Sirius ANTENNA IS
ANTENNA
DISCONNECTED
CALL 888-539- NO SUBSCRIPTION TO THE
SIRIUS SELECTED CHANNEL
Sirius Satellite RADIO SIGNAL
ACQUIRING
RECEPTION FAILURE
NO iPod iPod IS NOT CONNECTED
READING... iPod IS TRANSMITTING DATA
NO MUSIC FILES STORED IN
NO DATA
iPod
iPod STOPS TRANSMITTING
ERROR1
DATA FOR SOME REASON
iPod SOFTWARE NOT
ERROR2
SUPPORTED
OUTGOING TRANSMISSION IS
ERROR IMPOSSIBLE
CONNECTION ERROR/ERROR When registering:
FAILED
NO MEMORY SPACE
MEMORY FULL
Explanation and remedial action
• Turn the ACC off, and then turn it on again to resume the
operation.
• If this condition persists, please contact your dealer.
The CD changer is in the process of verifying the presence
of CDs after a magazine has been inserted into the CD
changer.
Confirm the file.
Confirm the USB memory standards.
Confirm the USB memory connection.
Connect the XM antenna.
Move to a place where a good signal can be received.
Select another channel.
Select another channel.
Select another channel.
Connect the Sirius antenna.
Subscribe to Sirius to receive Sirius Satellite radio services.
Move to a place where a good signal can be received.
Make sure the iPod is connected correctly.
Wait until the message disappears before operating.
Check the files stored in the iPod.
Check the iPod connection.
Check the iPod software.
Check whether the cell phone is connected and confirm the
condition of the cell phone.
Check whether the cell phone is Bluetooth compatible.
When connecting:
Check whether the cell phone has been registered in the
main unit.
Delete the phonebook data of the main unit, and then
perform the registration again.
If you have a question:
XXI
111