Displaying Device Information For The Main Unit - Eclipse CD7200 MKII Owner's Manual

Operation
ATTENTION
If you do not want to cancel the connection,
press the [RTN/BAND] button. The BT Audio
Set selection mode is activated again.
When the disconnection has been
4
completed, the "COMPLETED"
message appears on the display.
The main unit is now disconnected
from the portable device.
( and disappear from the display.
However, will not disappear while
Blutooth hands-free is connected.)
Displaying device information for
the main unit
The name of the device (main unit), the
passcode and the BD ADD (device address)
can be displayed.
Press the [SELECT] (Up/Down)
button while in the BT Audio Set
1
selection mode to select Device
INFO.
Press the [ENTER] button.
2
The name of the device and the
passcode are displayed.
ATTENTION
Each time the [SCREEN/TEXT] button is
pressed, the display changes in the following
way.
Device name / passcode ↔ Device name / BD
ADD (device address)
Press the [RTN/BAND] button.
3
The BT Audio Set selection mode is
activated again.
40