Operation; Connecting The Subwoofer - Dynaudio SUB 600 Owner's Manual

OPERATION

OPERATION
10

Connecting the subwoofer

Damage of device due to improper connection
NOTICE
 Set the mains power switch to OFF before connecting the Sub 600.
 Only switch the subwoofer on (mains power switch to ON) after all connections and set
up steps have been properly completed.
Note: The Dynaudio Sub 600 can be controlled by any source provided with a LFE or
preamplifier output. In the operating manual the expression "processor/receiver"
will be used for all these sources.
Dynaudio Sub 600