Changing Resolution
Change resolution by pressing YES . The resolution (photo,
extra fine, fine, or standard) is marked by an LED display just
above the YES
key.
Changing Contrast
Change contrast by pressing
normal, or dark) is marked by an LED display just to the right
of the
NO key.
Send to Single Location / Keypad
Dialing
1 Load your documents.
2 On the numeric keypad, dial as you would on a normal
telephone.
3 Press Start to begin the transmission.
NO. The contrast (light,
One-Touch
How to Program
1 Press Select Function.
2 Press 8/+/Location Program.
3 Press a One Touch key to program.
4 Enter the main fax number.
5 Press Start.
6 Enter the location ID (up to 16 characters).
7 Press Start.
8 Enter the optional alternate fax number, if desired. Refer to
steps 4 and 5.
9 Press Start to finish programming.
10 To continue programming One Touch keys, go back to
step 3. When you are finished, press Select Function.
How to Use
1 Load your documents.
2 Press the One Touch key.
3 Press Start to begin the transmission.
|
Quick Reference
E-7