Changing Resolution; Changing Contrast; Send To Single Location / Keypad Dialing; One-Touch - Oki OF5400 Quick Reference

Changing Resolution

Change resolution by pressing YES . The resolution (photo,
extra fine, fine, or standard) is marked by an LED display just
above the YES key.

Changing Contrast

Change contrast by pressing
normal, or dark) is marked by an LED display just to the right
of the NO key.
Send to Single Location / Keypad
Dialing
1 Load your documents.
2 On the numeric keypad, dial as you would on a normal
telephone.
3 Press Start to begin the transmission.

One-Touch

How to Program
1 Press Select Function.
2 Press 8/+/Location Program.
NO. The contrast (light,
3 Press a One Touch key to program—lift the keypad to
program keys 16-30.
4 Enter the main fax number.
5 Press Start.
6 Enter the location ID (up to 16 characters).
7 Press Start.
8 Enter the optional alternate fax number, if desired. Refer to
steps 4 and 5.
9 Press Start to finish programming.
10 To continue programming One Touch keys, go back to
step 3. If you are finished programming, press Select
Function.
How to Use
1 Load your documents.
2 Press the One Touch key. (Lift the keypad to reach keys
16-30.)
3 Press Start to begin the transmission.
|
Quick Reference E-7