Adobe 65029940 - Captivate - PC User Manual page 204

CHAPTER 10
194
Slides
To record new slides:
Open the Adobe Captivate project in which you want to record and insert new slides.
1
Select File > Record/Create > Additional Slides.
2
3 Decide where the new slides should be added. You can add new slides to the end of the project, or click a slide
in the list and add new slides after the selected slide.
4 When you finish, click OK.
5 The recording window appears.
Select options as necessary. For example, if you want to record an application that is open, click the pop-up
6
menu next to Optionally, select a window you'd like to record and choose the application. You can also click
Settings and set numerous recording options.
Note: You can position the capture area anywhere on your screen. You cannot, however, resize the capture area
because it is set to the same size as the project to which you are adding the slides.
7 When you are finished selecting options, click Record.
Record the new slides.
8
When you are finished recording, press End (or other key combination you have designated) on the keyboard
9
to stop recording.
The newly recorded slides are inserted into your project in the specified location.
Importing slides
Adobe Captivate allows you to import slides from one Adobe Captivate project into another. This can save you
valuable development time.
To import slides from one Adobe Captivate project into another:
1 Open the Adobe Captivate project to which you want to add existing slides.
Select File > Import > Slides/Objects.
2
Select the project that contains the slides to import and click Open.
3
The Import Project dialog box appears.
Select the slides you want to import into your current project. In Import, click the pop-up menu and select Slide
4
and objects, Slide only, or Objects Only. Use the slider bar, left arrow, and right arrow to navigate through all the
slides in the project. Click Select All or Clear all, and use the options in the pop-up menu to select or clear all slides
or objects.