Table of Contents
Advertisement
A.3.2 Determine the Liebert IntelliSlot Card Type and Firmware Version
Each type of Liebert IntelliSlot card uses different firmware. Attempting to upgrade a card with the
firmware for another type of card will fail and may damage the card.
To determine the type of card in your Liebert equipment:
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To view Web card information using terminal emulation or Telnet:
1. Open a connection to the Liebert IntelliSlot card (if needed, see
instructions in A.2.1 - Open the Terminal Emulation Interface
- Serial Connection, A.2.2 - Open the Terminal Emulation
Interface - TCP/IP Connection or A.2.3 - Open the Telnet Interface).
2. Choose Factory Settings from the Main Menu, then choose Agent Card Information.
3. The Liebert IntelliSlot card model, part number and firmware version appear in the following
example. Press the Enter key to return to the previous menu
Model and
Part Number
Firmware
Version
Web Interface
To view Web card information using a Web browser:
1. Open a connection to the Liebert IntelliSlot card (if needed, see instructions in A.2.4 - Open the
Web Interface).
2. Click on the Support tab, then Summary in the left panel. The Liebert IntelliSlot card model,
part number and firmware version appear in the right panel.
Support tab
Summary
A.3.3 Download the Firmware Upgrade File to the Computer
NOTE
Turn off the power management on your PC or laptop before beginning the update to ensure
that communication will not be disrupted during the process.
To download the upgrade file:
1. Open a Web browser, such as Internet Explorer (5.5 or newer).
2. Navigate to Liebert's Web site, www.liebert.com/downloads.
3. Choose the firmware upgrade for your card from the selections on the Web page (see
A.3.2 - Determine the Liebert IntelliSlot Card Type and Firmware Version).
4. Click on the link to download the file.
5. Save the file to your computer's hard drive.
Be sure to make a note of the location where the file is saved.
MAC Address
00-00-68-16-82-C1
Network Card Model
IntelliSlot Web Card
Network Card Part # OCWEBCARD
Manufacture Date
APR 28,2004
Serial Number
416701G105T2004APR280074
Boot Version
2.300.0
Boot Label
OCWEBCARD_HID3_2.300.0_034380
App Version
2.300.0
App Label
OCWEBCARD_HID3_2.300.0_035191
Hardware Version
3
CPU Speed
50 MHz
Flash Usage
4327 Out Of 8388 KByte
Hit Enter to Exit
A4
Preparing to Update Liebert IntelliSlot Firmware
Factory Settings Menu
----------------------
1: Reset to Factory Defaults
2: Agent Card Information
<ESC>: Cancel menu level
Please select a key ?>
Model, Part Number
and Firmware Version
Hide quick links:
Advertisement
Table of Contents
