System Information; Table 7 System Information Identifiers - Emerson Liebert IntelliSlot IS-WEB485ADPT Installation Manual

4.0 S I
YSTEM NFORMATION
System Information is optional and identifies the Liebert unit, its
location, a contact person and other information about the unit. The
default value of each field is "Uninitialized."
NOTE
This information also configures the SNMP parameters
sysName, sysContact, sysDescr, and sysLocation available
using RFC-1213 MIB II.
Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To edit any field in this category:
1. From the Main Menu, choose System Information.
2. Enter the number that corresponds to your choice, then enter the identifying information, using
the following as a guide.
Table 7 System information identifiers
Item
Name A name for the Liebert unit
A contact person or department responsible
Contact
for maintenance and operation of the Liebert unit
Location The location of the Liebert unit
Other useful information about the unit
Description
for quick reference
* Valid characters include spaces and other printable characters except double quotes (").
Web Interface
To access System Information through the Web interface:
• Click on the Configure tab, then Agent Info in the left panel and finally Edit in the right panel.
After making changes, click Save.
Configure tab
Agent
Info
Edit
Description
11
System Information Menu
------------------------
1: Name
2: Contact
3: Location
4: Description
<ESC>: Cancel menu level
Please select a key ?>
Maximum Length
255 characters*
64 characters*
64 characters*
64 characters*

System Information

Uninitialized
Uninitialized
Uninitialized
Uninitialized