Table 20 Sms Configuration Guide - Emerson Liebert IntelliSlot IS-WEB485ADPT Installation Manual

Terminal Emulation (Serial or TCP/IP Connection) / Telnet
To activate and set up SMS messages:
1. Choose Messaging from the Main Menu, then SMS.
Enable SMS [y/n] ?>
2. To enable the SMS feature, enter y (yes) at the prompt.
3. Choose SMS Configuration from the Messaging Menu, then select an option and use the
following guide to make changes.
Table 20 SMS configuration guide
Parameter
The e-mail address of the sender—for example, support@company.com—
SMS From
typically, the address where replies should be sent.
The message will be sent to this list of addresses. The SMS/Text Message
address is usually a 10-digit phone number followed by @____.com (where ____
might be a company name). To add an SMS address, use the format
SMS Message
a 1112223333@abc.com. Multiple addresses must be added individually.
Recipients
Changes may be made by entering d to delete an entry or e to edit an entry.
NOTE: To specify multiple recipients of the SMS message in the Web interface,
use a semicolon (;) to separate addresses in the SMS To box.
The subject line of the message. By default, this is the event description—e.g.,
SMS Subject
AlarmOnBypass—but it may be customized.
SMS Customize The text of the message sent to e-mail recipients. Choose from a list of items to
Message include in the message. For details, see 6.3 - Customize Messages.
SMTP Server The IP address or domain name of the SMTP e-mail server that sends messages.
Port SMTP server port—typically the default port, 25.
After saving changes to SMS parameters, send a test SMS message to verify the
Test SMS
settings are correct. The message status will be displayed.
View Test
Choose this option to display a log showing the results of test messages.
SMS Log File
Web Interface
To access SMS Configuration through the Web interface:
• Click on the Configure tab, then SMS in the left panel and finally Edit in the right panel. After
making changes, click Save.
Configure tab
SMS
Description
31
Messaging
Maximum
64
characters
64
characters
120
characters
—
32
characters
—
—
—
Edit