Virtual Server; Lan Clients - D-Link DSL-G604T User Manual

Wireless adsl router

Hide thumbs Also See for DSL-G604T:

Table of Contents

DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual

Virtual Server

To view the following window, click on the Advanced tab at the top of the window and then click the

Virtual Server button to the left. The Virtual Server will allow remote users access to various

services outside of their LAN through a public IP address, such as FTP (File Transfer Protocol) or

HTTPS (Secure Web). Select a connection type and enter an IP address for the virtual server. After

configuring the Router for these features, the Router will redirect these external services to an

appropriate server on the users' LAN. To choose a particular service click a radio button from the

category list and highlight the service from the Available Rules list. Click Add, and then reboot to

apply the rule.

Figure 5- 2. Virtual Server window

The LAN Clients menu is used when establishing Port Forwarding, Access Control and Advanced

Security rules for IP addresses on the LAN. This menu can be accessed directly by clicking on the

LAN Clients button or hyperlink in the Advanced setup menu. You can also click on the New IP

button located in the Port Forwarding, Access Control and Advanced Security menus to access this

menu. In order to use these advanced features it is necessary to have IP addresses available for

configuration. If there are no IP addresses listed in the LAN Clients menu, it will not be possible to

configure Port Forwarding, Access Control and Advanced Security. Use the LAN Clients menus to

add or delete static IP addresses for the advanced functions mentioned above, or to Reserve a

Dynamically assigned IP address for an advanced function. Dynamically assigned IP addresses will

only be listed if DHCP is enabled on the Router.

Table of Contents