Defining An Ela Class Of Service - Lucent Technologies INTUITY Messaging Solutions Manual

Administering AUDIX for ELA
6. Press (F3)
The cursor returns to the command line, and the system displays the
message Command Successfully Completed.
7. Continue with the next procedure or enter exit to leave AUDIX
Administration.

Defining an ELA Class of Service

The following task contains instructions for the fields that directly relate to ELA.
The other fields should be administered to support all capabilities that you
anticipate using, that is, maximum call answer length, announcement set, etc.
See your I
NTUITY
explanations of the other fields on these screens, and their implications.
NOTE:
ELA can take up to 12 hours to show the changes you make to subscriber
information in I
Before you begin the following procedure, ensure that you have an unused Class
of Service that you can define for ELA. We recommend that you use a COS that is
between 2 and 11. (Customers often use COS 1 as their default Class of Service).
To administer a COS for ELA:
1. Starting from the main menu (Figure 3-1 on page 3-14), select:
> AUDIX Administration
2. At the enter command: prompt, enter either:
Full Command Version
change cos COS_number
where COS_number is the unique Class of Service you would like to use
for ELA. For example, enter ch cos 10.
The system displays the Class of Service screen (Figure 3-2).
16
Issue 1 July 1997
to save the information in the system database.
ENTER
Messaging Solutions Release 4 Administration book for
AUDIX.
NTUITY
Short Command Version
ch cos COS_number