Rebooting The System - Lucent Technologies INTUITY Messaging Solutions Manual

Rebooting the System

6. Press
The system installs the software and displays several status messages.
When the software installation is complete, the system displays the
message:
7. Remove the tape from the tape drive and re-insert the back-up tape.
8. Enter q
9. Press (F6)
10. Continue with the next procedure, ''Rebooting the System''.
Rebooting the System
Rebooting is a 2-step process. First the voice system must be stopped, and then
the machine can be rebooted. To stop the voice system:
1. Starting from the main menu, select:
> Customer/Services Administration
> System Management
The system displays the Wait Time window (Figure 2-2).
Figure 2-2. Wait Time Window
2. Enter 60 in the Seconds: field to have the system wait one minute for
calls in progress to finish before stopping the voice system.
to select all.
ENTER
Installation of Enhanced List Application Package
was successful.
Insert a tape into the Tape Drive.
Type [go] when ready
or [q] to quit: (default: go)
repeatedly to return to the main menu.
CANCEL
> System Control
>Stop Voice System
11
Issue 1 July 1997