Increasing The Number Of Mailing Lists Allowed On The System - Lucent Technologies INTUITY Messaging Solutions Manual

Increasing the Number of Mailing Lists Allowed on the
System
3. Ensure the following fields are set to ON:
4. If either of these fields is OFF, and you purchased/installed ELA, call the
support center to request that the features be enabled for your Lucent
I
NTUITY
5. Press (F6)
Increasing the Number of Mailing
Lists Allowed on the System
The following task contains instructions for the fields that relate directly to ELA.
See "Field Definitions: System-Parameters Limits Screen" in Chapter 3 of your
I Messaging Solutions Administration guide for complete field descriptions
NTUITY
and to understand their implications.
To administer AUDIX system limits to support ELA:
1. Starting from the main menu (Figure 3-1 on page 3-14), select:
> AUDIX Administration
2. At the enter command: prompt, enter either:
Full Command Version
change system-parameters limits
The system displays the System-Parameters Limits screen.
3. Tab to the Lists, Total Entries: field and enter 200000.
4. The Lists/Subscriber field has a default value of 100. If this setting
has changed, enter a value of 15 or greater.
If the default value has not changed, skip this step.
5. The Recipients/Lists field has a default value of 250. If this setting
has changed to less than the default, enter a value of 250.
If the default value has not changed, skip this step.
NOTE:
If there was an administrative reason for reducing the value in this
field, your system may not be able to support ELA. Review your
system configuration and business needs to determine the
implication of returning this setting to 250.
Enhanced List Application
TCP/IP Administration
platform.
to exit this window.
CANCEL
Short Command Version
ch sys li
Issue 1 July 1997
15