SIIG Low Profile USB Adapter Quick Installation Manual

Download this manual

Introducing the Low Profile USB Adapter

The Low Profile USB Adapter conforms to the new PCI card form factor

standard made for space constrained system designs. It is a

high-speed Universal Serial Bus (USB) host adapter that has more

user-friendly features than the current I/O interfaces such as serial/

parallel ports. It works with all types of USB devices including digital

cameras, PC video cameras, scanners, joysticks and more.

Features and Benefits

• Compliant to USB Specification, Version 1.1

• Completely implements OpenHCI Specification, Version 1.0a

• Compliant to PCI Specification, Version 2.1

• Fully compatible with Windows Standard OHCI drivers

• User friendly plug-n-play and hot-swapping features allow

you to attach/remove USB devices without turning your

system off

• Provides 2 downstream ports for USB device connections

• Supports both 12 Mbps and 1.5 Mbps data transfer modes

Dimensions:

• PCB: 119.91 mm (L) x 64.41 mm (H)

• Bracket: 18.42 mm (W) x 79.20 mm (H)

System Requirements

• Pentium or equivalent computer with one available PCI slot

• Windows 98/98 SE/ME/2000

Package Contents

• One Low Profile USB Adapter

• One 5-year warranty card

• This quick installation guide

04-0192A

Low Profile USB Adapter

Quick Installation Guide

Table of Contents

Page 1: Quick Installation Guide
Low Profile USB Adapter Quick Installation Guide Introducing the Low Profile USB Adapter The Low Profile USB Adapter conforms to the new PCI card form factor standard made for space constrained system designs. It is a high-speed Universal Serial Bus (USB) host adapter that has more user-friendly features than the current I/O interfaces such as serial/ parallel ports.
Page 2: Hardware Installation
Hardware Installation General instructions for installing the card are provided below, since the design of computer cases and motherboards vary. Refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer’s case for a few seconds.
Page 3: Technical Support
RMA number posted on the outside of the shipping carton. Step 3: Ship the Product You are responsible for the cost of shipping back to SIIG at the following address: SIIG, Inc.
Page 4: Fcc Notice
Fremont, CA 94538-3152 Low Profile USB Adapter is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation.