Reset To Defaults - Asus WL-320gP - Wireless Access Point User Manual

Problem
The ASUS 802.11g AP Device
Discovery still cannot find or connect
to the ASUS AP after verifying the
IP address and LAN cable, changes
cannot be made, or password is
lost.
Solution
In case the ASUS 802.11g AP is inaccessible, you can restore the ASUS
802.11g AP's factory default settings. Use a pen or paper clip to push the
button for about five seconds or until the power LED starts blinking.

Reset to Defaults

Below is the factory default values of the ASUS 802.11g AP.
Name
Wireless - Interface
SSID
Channel
Encryption (WEP)
Broadcast SSID
Wireless - Bridge
AP Mode
Wireless - Access Control
MAC Access Mode
IP Config - LAN
IP Address
Get IP Address Automatically
Subnet Mask
Gateway
System Setup - Password
Operation Mode
User Name
Password
Chapter  -Troubleshooting
Default Value
default
6
None
No
Access Point Only
Disabled
192.168.1.1
Yes
255.255.255.0
(blank)
Access Point
admin
admin
ASUS 802.11g Access Point 7