Quick Setup In Ap Mode - Asus WL-320gP - Wireless Access Point User Manual

Chapter 3 - Software Configuration
3.

Quick Setup in AP mode

After you log in, you will see the ASUS 802.11g AP Home Page. The default
page will be the Access Point Mode.
1. Click Next to enter the Quick Setup page. Follow the instructions to set
up the ASUS Access Point.
2 . S e t m o d e t o A P o r
WDS(Bridge), Station(Client) or
URE(Repeater).
3. Setting up your wireless interface.
Specify to your wireless router an
SSID (Service Set Identifier),
which is a unique identifier
attached to packets sent over
WLAN. This identifier emulates a
password when a device attempts
to communicate with your wireless
router via WLAN.
If you want to protect transmitted
data, proceed to steps 4 and 5.
Otherwise, go to step 6.
4. Select a Security Level to enable
encryption methods.
Medium: Only users with the same WEP key settings can connect to
your wireless router and transmit data using 64bits or 128bits WEP key
encryption.
High: Only users with the same WPA pre-shared key settings can connect
to your wireless router and transmit data using TKIP encryption.
26 ASUS 802.11g Access Point