Your Wireless Router; Reset Button - Asus RT-N16 User Manual

Power LED
1
Off: No power.
On: Device is ready.
Flashing slow: Rescue mode
Flashing quick: WPS is processing.
2.4GHz LED
2
Off: No 2.4GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
LAN LED
3
Off: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
Flashing: Transmitting or receiving data via Ethernet cable.
WAN LED
4
Off: No power or no physical connection.
On: Has physical connection to a wide area network (WAN).
Flashing: Transmitting or receiving data via Ethernet cable.
Power (DC-In) port

Insert the bundled AC adapter into this port and connect your router to a power source.
WPS button
6
This button launches the WPS Wizard.
USB 2.0 ports
7
Insert USB 2.0 devices such as USB hard disks or USB flash drives into these ports.

Reset button

8
This button resets or restores the system to its factory default settings.
WAN (Internet) port
9
Connect a network cable into this port to establish WAN connection.
Flashing: Transmitting or receiving data via wired connection.
LAN 1 ~ 4 ports
10
Connect network cables into these ports to establish LAN connection.
6