Radius Setting - Asus WL-320gP - Wireless Access Point User Manual

Adding a MAC Address
The Known Client List collects MAC addresses of known clients, associated to
the AP. To add a MAC address to the Access Control List, simply select MAC
address from the list then click "Copy" button.
Note: Click the "Finish" button to save your new settings and restart
the ASUS 802.11g AP or click "Save" and restart later.

3.7. RADIUS Setting

This section allows you to set up additional parameters for connection with
RADIUS Server. It is required while you select "Authentication Method"
as "WPA" or "Radius with 802.1x" in "Wireless – Interface".
Server IP Address - This field specifies the IP address of the RADIUS
server to use for 802.1X wireless authentication and dynamic WEP key
derivation.
Server Port - This field specifies the UDP port number used by the RADIUS
server.
Connection Secret - This field specifies the password used to initialize a
RADIUS connection.
Note: Click the "Finish" button to save your new settings and restart
the ASUS 802.11g AP or click "Save" and restart later.
Chapter 3 - Software Configuration
ASUS 802.11g Access Point 3