Factory Default - Asus WL-320gP - Wireless Access Point User Manual

Chapter 3 - Software Configuration

3.11. Factory Default

Restoring Factory Default Settings
Web Manager
You can reset all settings to their factory default settings through the web
manager using the "Factory Default" page in "Advanced Setup". Click the
Restore button and wait about 30 seconds before trying to access the ASUS
802.11g AP.
Hardware
You can reset all settings to their factory defaults manually by pushing the
"Reset" button of the ASUS 802.11g AP while it is ON. See page 21. Push
the "Reset" button with a pen or a paper clip for about 5 seconds or until
the power LED starts blinking.
Note: You will be notified when factory default settings are restored
while using the web manager.
 ASUS 802.11g Access Point