Asus One Touch Wizard - Asus WL-130N User Manual

Chapter 2 - Installation

ASUS One Touch Wizard

Use ASUS One Touch Wizard to setup your wireless connection with an
existing wireless LAN.
1. Launch ASUS One Touch Wizard from
Start menu and click Next to set up your
wireless network.
3. Connection is complete. Click Next
to setup the IP address for the WLAN
Adapter.
Note: If the access point you want to connect has set up encryption
policies, you must configure the same encryption on your WLAN Adapter.
Select "Configure your wireless LAN settings" radio button in step 2
and make the settings accordingly. When the encryption settings are
complete, you can launch ASUS One Touch Wizard once again from the
Start menu to set up the connection with your AP.
We suggest WL-130N work with WL-500W Super Speed N wireless router
for maximum performance. Make sure the router firmware is the updated.
Check ASUS website for router latest updated firmware.
8
WL-130N_manual.indd 8
2. Select an AP from the Available Networks
field, then click Next.
4. Choose to obtain an IP address or to
assign static address manually for your
WLAN Adapter. When IP setting is
complete, click Finish to exit ASUS One
Touch Wizard.
ASUS WLAN Adapter
4/10/07 12:29:43 PM