Table of Contents
Advertisement
Chapter - Troubleshooting
Cannot connect to a Station (WLAN Adapter)
Follow the procedure below to configure your WLAN Adapter.
a. Verify that the "Network Type" is in "Ad Hoc" mode.
b. Verify that the "SSID" of your WLAN Adapter is set to the same "SSID" of
the other station (or another WLAN Adapter).
c. Verify that the "Channel" of the WLAN Adapter is "Auto" or set to the
same "channel" of the other station (or another WLAN Adapter).
d. Verify that the "Encryption" type is the same as the other station (or another
WLAN Adapter). If "WEP" encryption is enabled, you must set the same
"WEP" Keys on both stations.
Bad link quality or bad signal strength
There are two possible reasons. First is radio interference, keep the
environment around the WLAN Adapter away from microwave ovens and large
metal objects. Then try to reorient the WLAN Adapter antenna. Second is the
distance, decrease the distance between your WLAN Adapter and the access
point or station (or another WLAN Adapter).
28
WL-130N_manual.indd 28
ASUS WLAN Adapter
4/10/07 12:30:22 PM
Advertisement
Table of Contents
