Configuration; Tv Type; Tv Out; Vcr Out - Hitachi HDR081 Instruction Manual

Recorder
Hide thumbs Also See for HDR081:
Table of Contents

Advertisement

5.2. CONFIGURATION

You can configure the settings of your set
top box. Select Configuration from Setup
menu and press OK to enter this menu.
Press the BACK button on the remote to
exit

5.2.1. TV TYPE

Digital terrestrial television channels can
broadcast programmes in a widescreen
format which must be output differently to
normal and widescreen TV sets. This
function tells the receiver the screen
format of the TV connected so that
broadcasts
are
displayed
correctly.
Highlight
the
TV
Type
line
in
the
Configuration menu and use the "3/4"
keys to select 4:3 if you have a standard
TV set connected or 16:9 if it is a widescreen TV. This function duplicates the selection made at the
time of first installation and can be used if you change TV sets.

5.2.2. TV OUT

The receiver can output RGB , CVBS and S-Video signal from the TV SCART on the rear panel.
Although the RGB format results in a better quality picture, not all equipment can cope with an RGB
signal.

5.2.3. VCR OUT

This allows you to select CVBS or S-Video output from the VCR SCART socket.The receiver can
output SVideo and CVBS signal from the VCR SCART on the rear panel.

5.2.4. FAVOURITE MODE

This function enables or disables the 5 favourite channel list mode by pressing " / " buttons and
press OK . IF a favourites list exists it will switch to the list number selected. If there is no favourite
listing, a warning message is displayed.

5.2.5. CHANNEL LIST

Use " / " buttons to go to Channel List option. Use " / "buttons to toggle Channel List Mode. If
you select "TV Only", with the PR+/PR- buttons, you navigate through only TV channels. If you select
"Radio Only", with the PR+/PR- buttons, you navigate through only radio channels. If you choose
"Show All" all, channels can be navigated with the PR+/PR- buttons. To save the recent changes and
exit; press the MENU button.

5.2.6. SCAN ENCRYPTED CHANNELS

Use "▲ / ▼" buttons to go to the Scan Encrypted Channels option. Use "◄ / ►" buttons to toggle
YES or NO the searching for encrypted channels.
24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents