Hitachi CM761ET User Manual page 10

—
---
—
—
.-
MENu
--
'=K
\Wswt.~
000000
Menu Button Adjustment Buttons
Power Indicator
Power ON/OFF
Press the power switch, to switch the power ON or OFF. When power is ON, the power
indicator lights.
~
NOTE:
*
Turn on the monitor first, then the computer.
* After turning OFF the power switch, wait at least 5 seconds before restarting the monitor.
j If this 5 second delay is not observed, the monitor may operate incorrectly.
Brightness/Contrast Adjustment
(1) Press one of the adjustment buttons when the OSD [`""-""""""""""-"" """""-""""""""`'-"`"```````"`-""--"-"
(On Screen Display) is not shown. The OSD function ~
"EasyMenu" then shows the condition of Brightness \ ~~I~~TNE~s
and Contrast.
CONT@RAST ~
:H
~m 01- 10:
(2) To adjust, use the adjustment buttons @/@J for ~ 50
50 :
Brightness, and
@t@
for Contrast.
94 ktlz / 75Hz
............................................................
Other Functions
(1) Press the menu button, EasyMenu then shows the \-"""""""-""""""""-"-""""""""-"-"""""""""""
elmlmananu:
function menu and the condition of selected functions. ~ ~ e ~. ~ ~Q ~ ~ ~ ~
(2) To select the function, use the menu button.
H. SIZE
H. POSITION ~
(3) To execute the selected function, use the adjustment ~~ ~ g ~ ~ ~:
buttons in the Table 1-1 overleaf.
: 94 Mb! 7511Z
.. . .. . . . .. . . .. .. . . . .. . .. . . . . .. . . . .. . . . . . . . .. .. .. . .. . . . . .. . ..
NOTE:
*
You can select the EasyMenu language.
Use the function "LANGUAGE SELECT".
* if the function "EXIT STORE" is "YES", you can store the adjusted condition
automatically at clearing the EasyMenu,
*To clear the EasyMenu, either push the menu switch and hold for 3 seconds, or wait
for 8 seconds.
1-8