Getting Started; Preparation - Hitachi HDC-1097E Instruction Manual

GETTING STARTED

Preparation

1. Attach the camera strap.
2. Open the battery/memory card cover.
3. Insert the supplied battery with correct orientation as
shown. (label side back)
4. Insert an SD/SDHC memory card (Optional).
The camera has 32MB internal memory (27MB available
for image storage), but you can load an SD/SDHC memory
card to expand the camera's memory capacity.
Be sure to format the memory card with this camera
before its initial usage.
5. Close the battery/memory card cover and make sure it is
locked securely.
To prevent valuable data from being accidentally erased from
an SD/SDHC memory card, you can slide the write protect tab
(on the side of the SD/SDHC memory card) to "LOCK".
To save, edit, or erase data on an SD/SDHC memory card,
you must unlock the card
To prevent damaging of an SD/SDHC memory card, be sure
to turn off the power when inserting or removing the SD/
SDHC memory card. If inserting or removing the SD/SDHC
memory card with the power on, the camera will automatically turn off.
EN-12