Erasing Images - Hitachi HDC-1097E Instruction Manual

Erasing Images

Erasing in Photography Mode (Quick Delete Function)
The quick delete function enables you to delete the last captured image during capture.
1. Slide the mode switch to [
2. Press the button.
The last image and the quick delete menu
appear on the screen.
3. Select [Execute] with the
4. Press the
To not delete, select [Cancel], and press the
button.
Erasing a single image / Erasing all images
1. Press the button.
2. Select the image you want to erase with the
buttons.
3. Press the button.
4. Select [Single] or [All] with the
and press the
[Single]: Erases the selected image or the
last image.
[All]: Erases all of the images except for the
protected images.
5. Select [Execute] with the
press the
To not erase, select [Cancel], and press the
button.
Deleting an image will not affect sequential image numbering. For example, if you delete image
number 240, the next captured image will be numbered 241 even though 240 no longer exists. In
other words, an image-number is retired when an image is deleted and will not be reused or
reassigned to another subsequently captured image.
EN-26
] or [
/ buttons.
button to confirm the deletion.
button.
/
button.
].
/
/ buttons,
buttons, and