Compaq SLR Tape Drive User Manual page 64

5-23 Troubleshooting
Creating a ROMPaq diskette
To create the diskette, follow this procedure:
1. Boot your system from the Compaq SmartStart and Support Software
CD version 3.10 or higher.
2. Select Create Support Software from the Compaq System Utilities
screen.
3. Select the appropriate option for your system from the Diskette Builder
screen.
4. Follow the instructions on the screen to create the diskette.
Upgrading the firmware
To carry out the upgrade, follow this procedure:
1. Boot your system using the diskette.
2. Select Enter from the Welcome screen.
3. Select the drive from the list of programmable devices displayed on the
Select a Device screen.
4. Select Enter from the Select a Device screen.
5. Review the Select an Image screen:
Device to reprogram:
Current ROM revision:
Select Firmware Images:
Table 5-4
Select an Image screen
Item Contents
The name of the device
The date of your current firmware
The date of the latest firmware on the
diskette
Compaq SLR Tape Drive User Guide