Table of Contents
Advertisement
34
BladeCenter S Type 7779/8886: Installation and User's Guide
3. Position the rack-mounting template that is supplied with your BladeCenter S
system on the rack so that the edges of the template do not overlap any other
installed devices. Line up and select the holes on the front and rear of the rack
in the locations that are indicated by the arrows on the template.
4. Use a screwdriver to install the cage nuts or the clip nuts, as required for your
rack, in the locations that are indicated on the template.
Note: For racks with square holes, use the cage nuts. For racks with round
holes, use the clip nuts.
Cage
nut
T
e
m
p
l
a
t
e
Clip
nut
Advertisement
Table of Contents
